Tag Archives: v10

RNS-310 FX Western Europe 2018 V10 SD Card

Here is how to prepare SD for RNS310 (VW FX EUROPE WEST V10 2018)

1 – Card EVO/EVO+ (16Gb,32Gb,64G SD) older then summer 2016.
2 – Format card in Windows (by Guiformat.exe utility) and copy `cryptnav` on card . Nothing more!
3 – Start Laptop from boot flash Ubuntu (previously created in PC by LiLi USB Creator)
4 – Copy file mmc and mmc32 to Desktop
5 – Right cick -> open terminal, then go to the Desktop folder ( by command “cd Desktop” )
6 – Make command execution rights by command “chmod 777 mmc32” and “chmod 777 mmc”
7 – Insert the SD in slot. Terminal command “df” and verify the name card.

Somewhere down everything must occur “mmcblk0” + p + a number.
The suffix p “number” is the partition on the card, we are not interested, just use “mmcblk0”.
When you do not see anywhere mmcblk0,
you must try different Laptop with on matherboard integrated cardreader.

Now you can read the original CID by command “cat / sys / block / mmcblk0 / device / cid”

8 – change CID by terminal command:
“sudo ./mmc32 prog_cid / dev / mmcblk0 094150414620534402104afb57011900”
or
“sudo ./mmc prog_cid / dev / mmcblk0 094150414620534402104afb57011900”

Writing new CID: 094150414620534402104afb57011900
Success! Remove and Reinsert SD card to check new CID.

If you do not see messages about success, remove and reinsert SD card
and check CID by command “cat /sys/block/mmcblk0/device/cid”

Now will be displaying the new CID 094150414620534402104afb57011900
You should see 094150414620534402104afb57011901 line.
The last two characters may be different, for example, be 69.
If CID changed besides the last two numbers, so it’s okay.
On the last two numbers does not matter,
it’s just a checksum, which generates SD card itself.

If the CID unchanged try again command for changing, remove and reinsert SD card
and check CID by command “cat /sys/block/mmcblk0/device/cid”

If not change, try the same command, but with different bit version of mmc,
remove and reinsert SD card
and check CID by command “cat /sys/block/mmcblk0/device/cid”

Torrent: rns310-gpseraeu Password: gpseraeu

2018_V10_VW_RNS_310_West_Europa_SD info